CORROSION INHIBITOR, 200LTR

Corrosion Inhibitor is designed to provide good short to medium term protection of metallic parts and components. Principally designed for indoor use, corrosion inhibitor will also provide a degree of short-term protection to components stored outdoors. Also, it has a soft, flexible film, will not harden or crack, total protection assured. Will not stain or mark components. Use on ferrous metals as a long-term protective coating for stored equipment, or as a transportation film for trans-global component shipping.

• 200ltr fill size
• Opaque, brown liquid appearance
• Protection against corrosion meets requirements of MIL-PRF-16173E (Class I, Grade 2)
• Water displacing passes IP 178, method B
• Salt spray test 250hours minimum protection (ASTM B117) at 18µm film thickness
• Film forming properties, a continuous, homogenous film remains after 20minutes
• Soluble in solvents, insoluble in water
• Classified as extremely flammable under current EC regulations
• Anti-corrosion

Notes

Stored at normal ambient temperatures and has a shelf life of not less than 6 years with correct storage. Aerosols should always be stored below 50°C, away from direct heat and flame.