You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
B57238S0150M000
Thermistor, ICL NTC, 15 ohm, -20% to +20%, Radial Leaded, B57238S0 Series
Date/Lot Code
- Manufacturer:
- EPCOS EPCOS
- Manufacturer Part No:
- B57238S0150M000
- Order Code:
- 1704470
- Product Range
- B57238S0
- Technical Datasheet:
- B57238S0150M000 Datasheet
Product Range Selector (B57238S0)
See all from this product rangeProduct Information
Want to see similar products? Simply select your required attributes below and hit the button ×
- :
- B57238S0
- :
- 16mm
- :
- 15ohm
- :
- UL
- :
- -
- :
- 4.4A
Technical Documents (3)
CAD Downloads
--Please select...
✔
--Please select...
×
Terms and Conditions
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Product Overview
The B57238S0150M000 is a 2-pin NTC Thermistor with kinked leads of tinned copper wire and coated thermistor disk for line applications. This B57238S0 series thermistor is useable in series connections up to 265Vrms. It is marked with manufacturer's logo, NTC and resistance value stamped on. A lead (wire) may be bent at a minimum distance of twice the wire's diameter plus 4mm from the component head or housing. When bending ensure the wire is mechanically relieved at the component head or housing. The bending radius should be at least 0.75mm. Twisting (torsion) by 180° of a lead bent by 90° is permissible at 6mm from the bottom of the thermistor body. Soldering can use resin-type flux or non-activated flux. The soldering due to insufficient preheating may cause ceramic cracks. Suitable for inrush current limiting, switch-mode power supplies and soft-start motors (e.g. in vacuum cleaners).
- Bending radius should be at least 0.75mm
- Wide resistance range
- 3.9W Maximum power
Applications
Safety, Power Management, Motor Drive & Control
Footnotes
The self-heating of a thermistor during operation depends on the load applied and the applicable dissipation factor. Gloves are recommended.
Warnings
Avoid contamination of thermistors surface during storage, handling and processing. Do not touch components with bare hands. Washing process may damage due to possible static/cyclic mechanical loads.
Best Seller
2,062 In stock Need more?
2,062 available same day shipping :Order before 15:00 (for re-reeled items 15:00) Mon-Fri (excluding National Holidays)
×
You can reserve stock now just order your desired quantity and checkout as normal. The quantity that cant be dispatched now will be placed on back order and sent as soon as we get a delivery from our supplier. You only get charged when the products are dispatched to you.
Extra stock is available upon order to the Supplier Lead Time which is approximately 5/22/23
More stock available week commencing 5/22/23
Standard lead time for this product is 8 weeks.
Standard lead time for this product is 8 weeks.
Due to market conditions delivery times are for general guidance only and may be subject to change at short notice
US$1.73
Pricing is unavailable. Please contact customer services.
- Price for:
- Each
Multiple: 1 Minimum: 1
| Quantity | Price | Your Price |
|---|---|---|
| 1+ | US$1.73 | |
| 10+ | US$1.379 | |
| 50+ | US$1.021 | |
| 100+ | US$0.922 | |
| 200+ | US$0.87 | |
| 500+ | US$0.818 | |
| 2500+ | US$0.766 | |
| 5000+ | US$0.714 | |
Pricing is unavailable. Please contact customer services.
Total Price:
Total Price: ( )
Total Price: --
Filter Tool